- 定做培养基/定制培养基
- 颗粒培养基
- 标准菌株生化鉴定试剂盒
- 预灌装即用型成品培养基
- 2025年版中国药典
- 促销/特价商品
- 院感/疾控/体外诊断/采样管
- 样品采集与处理(均质)产品
- 按标准检索培养基
- 模拟灌装用培养基
- 干燥粉末培养基
- 培养基添加剂/补充剂
- 生化反应鉴定管
- 染色液等配套产品
- 对照培养基/标准品
- 实验耗材与器具
- 生化试剂/化学试剂
- 菌种鉴定服务
培养基配方
您现在的位置: 网站首页 >> 培养基配方
Pelobacter acetylenicus Medium
[所属分类:培养基配方] [发布时间:2021-7-1] [发布人:网站管理员2] [阅读次数:] [返回]
Pelobacter acetylenicus Medium
MgCl 2 ·6H 2 O .................................................................................3.0g
KCl................................................................................................0.5g
NH 4 Cl .........................................................................................0.25g
KH 2 PO 4 .........................................................................................0.2g
CaCl 2 ·2H 2 O ................................................................................0.15g
Resazurin...................................................................................1.0mg
NaHCO 3 solution.....................................................................10.0mL
Na 2 S·9H 2 O solution.................................................................10.0mL
Acetoin solution.......................................................................10.0mL
Trace elements solution SL-10..................................................1.0mL
pH 7.2 ± 0.2 at 25°C
NaHCO 3 Solution:
Composition per 10.0mL:
NaHCO 3 ........................................................................................2.5g
Preparation of NaHCO 3 Solution: Add NaHCO 3 to distilled/de-
ionized water and bring volume to 10.0mL. Mix thoroughly. Sparge
with 80% N 2 + 20% CO 2 . Autoclave for 15 min at 15 psi pressure–
121°C.
Na 2 S·9H 2 O Solution:
Composition per 10.0mL:
Na 2 S·9H 2 O..................................................................................0.36g
Preparation of Na 2 S·9H 2 O Solution: Add Na 2 S·9H 2 O to dis-
tilled/deionized water and bring volume to 10.0mL. Mix thoroughly.
Sparge with 100% N 2 . Autoclave for 15 min at 15 psi pressure–121°C.
Acetoin Solution:
Composition per 10.0mL:
Acetoin..........................................................................................1.0g
Preparation of Acetoin Solution: Add acetoin to distilled/deion-
ized water and bring volume to 10.0mL. Mix thoroughly. Sparge with
100% N 2 . Autoclave for 15 min at 15 psi pressure–121°C.
Trace Elements Solution SL-10:
Composition per liter:
FeCl 2 ·4H 2 O...................................................................................1.5g
CoCl 2 ·6H 2 O ................................................................................0.19g
MnCl 2 ·4H 2 O...........................................................................100.0mg
ZnCl 2 ........................................................................................70.0mg
Na 2 MoO 4 ·2H 2 O .......................................................................36.0mg
NiCl 2 ·6H 2 O..............................................................................24.0mg
H 3 BO 3 ........................................................................................6.0mg
CuCl 2 ·2H 2 O ...............................................................................2.0mg
HCl (25% solution)..................................................................10.0mL
Preparation of Trace Elements Solution SL-10: Add FeCl 2 ·4H 2 O
to 10.0mL of HCl solution. Mix thoroughly. Add distilled/deionized
water and bring volume to 1.0L. Add remaining components. Mix thor-
oughly.
Preparation of Medium: Prepare and dispense medium under 80%
N 2 + 20% CO 2 . Add components, except NaHCO 3 solution,
Na 2 S·9H 2 O solution, and acetoin solution, to distilled/deionized water
and bring volume to 970.0mL. Mix thoroughly. Sparge with 80% N 2 +
20% CO 2 . Autoclave for 15 min at 15 psi pressure–121°C. Aseptically
and anaerobically add 10.0mL of sterile NaHCO 3 solution, 10.0mL of
sterile Na 2 S·9H 2 O solution, and 10.0mL of sterile acetoin solution or,
using a syringe, inject the appropriate amount of sterile NaHCO 3 solu-
tion, sterile Na 2 S·9H 2 O solution, and sterile acetoin solution into indi-
vidual tubes containing medium.
Use: For the cultivation and maintenance of Pelobacter acetylenicus.
山东拓普生物工程有限公司 培养基配方 http://www.topbiol.com
Composition per liter:
NaCl............................................................................................20.0gMgCl 2 ·6H 2 O .................................................................................3.0g
KCl................................................................................................0.5g
NH 4 Cl .........................................................................................0.25g
KH 2 PO 4 .........................................................................................0.2g
CaCl 2 ·2H 2 O ................................................................................0.15g
Resazurin...................................................................................1.0mg
NaHCO 3 solution.....................................................................10.0mL
Na 2 S·9H 2 O solution.................................................................10.0mL
Acetoin solution.......................................................................10.0mL
Trace elements solution SL-10..................................................1.0mL
pH 7.2 ± 0.2 at 25°C
NaHCO 3 Solution:
Composition per 10.0mL:
NaHCO 3 ........................................................................................2.5g
Preparation of NaHCO 3 Solution: Add NaHCO 3 to distilled/de-
ionized water and bring volume to 10.0mL. Mix thoroughly. Sparge
with 80% N 2 + 20% CO 2 . Autoclave for 15 min at 15 psi pressure–
121°C.
Na 2 S·9H 2 O Solution:
Composition per 10.0mL:
Na 2 S·9H 2 O..................................................................................0.36g
Preparation of Na 2 S·9H 2 O Solution: Add Na 2 S·9H 2 O to dis-
tilled/deionized water and bring volume to 10.0mL. Mix thoroughly.
Sparge with 100% N 2 . Autoclave for 15 min at 15 psi pressure–121°C.
Acetoin Solution:
Composition per 10.0mL:
Acetoin..........................................................................................1.0g
Preparation of Acetoin Solution: Add acetoin to distilled/deion-
ized water and bring volume to 10.0mL. Mix thoroughly. Sparge with
100% N 2 . Autoclave for 15 min at 15 psi pressure–121°C.
Trace Elements Solution SL-10:
Composition per liter:
FeCl 2 ·4H 2 O...................................................................................1.5g
CoCl 2 ·6H 2 O ................................................................................0.19g
MnCl 2 ·4H 2 O...........................................................................100.0mg
ZnCl 2 ........................................................................................70.0mg
Na 2 MoO 4 ·2H 2 O .......................................................................36.0mg
NiCl 2 ·6H 2 O..............................................................................24.0mg
H 3 BO 3 ........................................................................................6.0mg
CuCl 2 ·2H 2 O ...............................................................................2.0mg
HCl (25% solution)..................................................................10.0mL
Preparation of Trace Elements Solution SL-10: Add FeCl 2 ·4H 2 O
to 10.0mL of HCl solution. Mix thoroughly. Add distilled/deionized
water and bring volume to 1.0L. Add remaining components. Mix thor-
oughly.
Preparation of Medium: Prepare and dispense medium under 80%
N 2 + 20% CO 2 . Add components, except NaHCO 3 solution,
Na 2 S·9H 2 O solution, and acetoin solution, to distilled/deionized water
and bring volume to 970.0mL. Mix thoroughly. Sparge with 80% N 2 +
20% CO 2 . Autoclave for 15 min at 15 psi pressure–121°C. Aseptically
and anaerobically add 10.0mL of sterile NaHCO 3 solution, 10.0mL of
sterile Na 2 S·9H 2 O solution, and 10.0mL of sterile acetoin solution or,
using a syringe, inject the appropriate amount of sterile NaHCO 3 solu-
tion, sterile Na 2 S·9H 2 O solution, and sterile acetoin solution into indi-
vidual tubes containing medium.
Use: For the cultivation and maintenance of Pelobacter acetylenicus.